tempestplus
Tempest Plus

Bent u klaar voor het grote werk? Als u serieus praat over snelheid, dan moet u de Tempest Plus eens beter bekijken. Ontworpen voor grote zware bass boten, snoekbaarsboten en sportboten met een zware V6 buitenboordmotor. De Tempest Plus 3-blad RVS schroef neemt u mee naar het volgende niveau! Flo-Torq II busset 835257Q6 is inbegrepen, sommige Optimax Pro XS motoren hebben een apart te bestellen 1-1/4 asmaat FloTorq busset nodig, nummer 840389K06.

Voor V6 buitenboordmotoren

Grote (14-5/8") diameter voor hoge montage hoogte

Super voor buitenboordmotor Bass, Snoekbaars en bay boten alsook sportboten.

Agressieve bladvorm voor superieure lift

Uitgerust met PVS, Prestatie Ventilatie Systeem

Past ook op Evinrude, Yamaha, Honda, Suzuki en Johnson buitenboordmotoren d.m.v. een andere bij te bestellen FloTorq II busset, zie elders op de site.

17" tot 29" spoedmaat

 

Are you ready to move up to the big leagues? If you're serious about speed, take a look at the Tempest Plus. Designed for large heavy bass boats, walleye boats and sport boats with big V-6 outboard power, the Tempest Plus 3-blade stainless steel propeller can take you to the next levelfast. 835257Q6 hub kit included. Select Optimax Pro XS engines with 1 1/4 shafts require hub kit 840389K06.

For V-6 outboards

Large (14 5/8") diameter for high motor height installations

Great for outboard powered bass, walleye, and bay boats

Aggressive blade geometry for amazing lift

Equipped with PVS Performance Vent System

For use with non-Mercury applications see Flo-Torq II reference chart.

17" - 29" pitch

!

Mercury V6 + Mercruiser

!

This propellers will fit Mercury and Mariner V6 outboards as well as all Verado outboards. Only exception is the 225 4-stroke build by Yamaha. Propellers will also fit all Mercruiser Alpha and Bravo One drives.

Deze schroeven passen op Mercury en Mariner V6 buitenboordmotoren alsook Verado motoren. Enige uitzondering is de 225 4-takt die door Yamaha is gemaakt. Schroeven passen ook op de Mercruiser Alpha en Bravo One aandrijvingen.

Flo-Torq hub/bus V6&SD

!

Most of these Mercury propellers are supplied with a Mercury FloTorq II hub kit. You can order a FloTorq IV hub kit for smooth shifting without clatter on 4-strokes. You can also order a different FloTorq II or IV hub kit that fit different brand V6/V8 outboard motors as well as sterndrives, so you can use the extremely good Mercury propeller on your non-Mercury engine!

De meeste van deze Mercury schroeven zijn uitgerust met een Mercury FloTorq II bus set. U kan de FloTorq IV bus set extra bijbestellen om extra soepel te schakelen en tegen het rammelen bij 4-takt motoren. U kan ook een ander model FloTorq II of IV bus set erbij bestellen die past op een ander merk V6/V8 buitenboordmotor of inboard hekdrive, zo kan u de extreem goede Mercury schroef ook op uw niet-Mercury motor gebruiken!

Mercury Tempest Plus 14-5/8 x 29 propeller

48-825870A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 27 propeller

48-825868A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 26 propeller

48-825874A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 25 propeller

48-825866A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 24 propeller

48-825872A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 23 propeller

48-825864A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 21 propeller

48-825862A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 19 propeller

48-825860A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8" Right hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 23 Left/Links

48-825865A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8", Left hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 21 Left/Links

48-825863A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8", Left hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

Mercury Tempest Plus 14-5/8 x 19 Left/Links

48-825861A47
!

3 blades, aggressive blade geometry

Stainless steel, equipped with PVS

Large diameter, 14-5/8", Left hand rotation

Comes with Flo Torq II hub kit (835257Q 6)

FLO-TORQ II HUB KIT MERCURY 40+

835257Q 1
!

Complete hub kit that is standard with many Genuine Mercury propellers.

Past op Mercury/Mariner 40 Bigfoot en groter (alleen door Mercury gemaakte motoren) en op MerCruiser Alpha en Bravo One alsook de voorlopers hiervan (MC-I en TRS)

FLO-TORQ II HUB KIT HONDA 75-90 OUD

835277Q 1
!

Honda outboards (75-90 HP thru 1998)

Inhoud:

12-835467 1 Forward thrust washer

835290A1 Plastic drive sleeve

826074Q 1 Aft adaptor

14-816629Q Tab lock washer

11-827614 Prop nut

FLO-TORQ II HUB KIT HONDA 75-130 NIEUW

835279Q 2
!

Honda buitenboordmotoren (75-90 PK 1999-en nieuwer, 115-130 HP)

Inhoud:

12-853359 Fwd thrust washer

835290A1 Plastic drive sleeve

826074Q 1 Aft adaptor

12-887972 Washer

859939 Lock

18-47959 Cotter pin

FLO-TORQ II HUB KIT HONDA 135+

835278Q 1
!

Honda 135, 150, 175, 200 en 225 PK 4-Takt. Past ook op Mercury Racing propellers.

Inhoud:

12-888451 Forward thrust washer

835290A1 Plastic drive sleeve

826074Q 1 Aft adaptor

12-887972 Spacer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT OMC - Volvo-Penta

835270Q 1
!

OMC Cobra/Volvo SX sterndrives (19 tooth spline, 1994-present)

Caution! When installing stainless steel propellers, remove the anode to bearing

carrier and check clearance before operation.

Inhoud:

12-835467 7 Forward thrust washer

835290A1 Plastic drive sleeve

850330Q Aft adaptor

879143 Spacer

802126Q 1 Nut

Cotter pin included with Nut

FLO-TORQ II HUB KIT EVINRUDE, JOHNSON & OMC NIEUW

835265Q02
!

Evinrude, Johnson outboards & OMC stern drive (V-6 & V-8 staart, 1991 & Nieuwer

incl. new 250 HP V-6 outboard en 2003 V-6 met Cresent staart). Past ook op Mercury Racing propellers.

Inhoud:

12-835467-008 Forward thrust washer, 835290A1 Plastic drive sleeve, 834899Q Aft

adaptor, 12- 887972 Aft Washer, 802009Q1 Nut, Cotter pin and spacer

FLO-TORQ II HUB KIT EVINRUDE, JOHNSON & OMC -1990

835267Q 1
!

Evinrude/Johnson, OMC stern drives (V-6 & V-8 staart, 1984-1990)

Inhoud:

12-835467 1 Forward thrust washer

835290A1 Plastic drive sleeve

834899Q Aft adaptor

802009Q 1 Nut Kit

(Cotter pin and spacer included with Nut kit)

FLO-TORQ II HUB KIT EVINRUDE & JOHNSON V4

835266Q 1
!

Evinrude & Johnson buitenboordmotor (V-4 staart, 1968-en nieuwer) Use only with Quicksilver Propellers (QS5136H, QS5138H, QS5140H, QS5142H, QS5144H propellers have a small diameter labyrinth seal)

Inhoud:

859915 Thrust washer

835290A 1 Plastic drive sleeve

834839Q Aft adaptor

859929 Nut

18-89961 Cotter pin

FLO-TORQ II HUB KIT SUZUKI/JOHNSON 90-115 4T

835283Q 1
!

Johnson & Suzuki 90-115 HP 4-takt buitenboordmotor

Bestaat uit:

12-888939 Fwd thrust washer

835290A1 Plastic drive sleeve

826074Q1 Aft adaptor

12-887972 Washer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT SUZUKI/JOHNSON 140 4T

835283Q 2
!

Johnson & Suzuki 140 HP 4-takt buitenboordmotor

12-835467 1 Fwd thrust washer

835290A1 Plastic drive sleeve

826074Q1 Aft adaptor

12-887972 Washer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT SUZUKI 60-140

835282Q 1
!

Suzuki 60 PK 4-Takt (1998 en nieuwer) 70 PK 4-Takt (1998-2008) 75-140 PK 2-takt

Inhoud:

12-854621 Fwd thrust washer

835290A1 Plastic drive sleeve

834839Q Aft adaptor

12-887972 Washer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT SUZUKI 150+

835281Q 1
!

Suzuki 150-225 PK 2-Takt buitenboordmotoren en 150-250 PK 4-Takt buitenboordmotoren. Kan

worden gebruikt met Mercury Racing propellers.

Inhoud:

12-853359 Fwd thrust washer

835290A1 Plastic drive sleeve

826074Q 1 Aft adaptor

12-31211A3 Washer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT SUZUKI DF70-90

835283Q03
!

Suzuki 70-90 PK 2009 en nieuwer

12-8M80042329 Fwd thrust washer

835290Q 1 Plastic drive sleeve

826074Q 1 Aft adaptor

12-887972 Washer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT TOHATSU

835284Q 1
!

Tohatsu/Nissan (70C, 90-140 PK)

Inhoud:

12-853948T Fwd thrust washer

835290A1 Plastic drive sleeve

826074Q1 Aft adaptor

12-16140 Washer

11-16147 Nut

18-815026 Cotter Pin

FLO-TORQ II HUB KIT YAMAHA 50-100

835272Q 1
!

Yamaha buitenboordmoteren (50-100 PK, splines in het voorste drukring)

Inhoud:

12-853555Q Forward thrust washer

835290A1 Plastic drive sleeve

826074Q 1 Aft adaptor

12-850076 Spacer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT YAMAHA V4-V6 2T

835271Q 2
!

Yamaha buitenboordmotoren & inboards (V-4 & V-6 staart, 1980-nieuwer), exclusief de 4-takt. Past ook op Mercury Racing propellers.

Inhoud:

12-853948T Forward thrust washer

835290A1 Plastic drive sleeve

826074Q 1 Aft adaptor

12-850076 Spacer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II HUB KIT YAMAHA F150+

835274Q 1
!

150, 200 & 225EFI PK(4-TAKT) Yamaha of 225 (4-TAKT) Mercury

853948 1 Forward thrust washer

835290A1 Plastic drive sleeve

826074Q 1 Aft adaptor

12-887972 Spacer

859939 Nut

18-47959 Cotter Pin

FLO-TORQ II MET BUS MERCURY 40+

835257Q 6
!

Same as normal Flo-Torq II, but then with the bushing 23-856163A1.

The propeller is stronger attached to the shaft, for applications when the propeller is not fully submerged in the water (high engine mounted).

Past op Mercury/Mariner 40 Bigfoot en groter (alleen door Mercury gemaakte motoren) en op MerCruiser Alpha en Bravo One alsook de voorlopers hiervan (MC-I en TRS)

FLO-TORQ II SOLID HUB KIT NORMAAL 1"

835258Q 1
!

This solid hub is specially designed for Chopper, Cleaver, Lightning E.T., Pro E.T. and old style Bravo I (with MerCruiser logo) propellers.

Past op Mercury/Mariner 40 Bigfoot en groter (alleen door Mercury gemaakte motoren) en op MerCruiser Alpha en Bravo One alsook de voorlopers hiervan (MC-I en TRS)

FLO-TORQ II SOLID HUB KIT NORMAAL 1"

835258Q 2
!

Standard length hub for use with the Fury, Tempest Plus, Mirage Plus, REV 4, Trophy

Plus, Bravo I & Maximus propellers (Bravo One Sterndrive 400HP+, 1" prop shaft).

FLO-TORQ II HD SOLID HUB KIT DIK 1,25"

840389Q06
!

Bestaande uit:

840382A02 black snubber strip replacement kit

840383A 2 prop nut & washer kit

For use with HD (Heavy Duty) 1.25" propshaft when installed on Mercury Racing

200XS, 225X, 2.5 EFI, 225 (Pro X, Pro XS, Sport XS), 250 (XS, Pro XS, Sport XS),

300 (X, XS), Sport, Torque and HD Fleet Master gearcases (not Fleet Masters with

1" propshafts) and MerCruiser Bravo One XR or XZ,Sport Master and shorty Sport

Master sterndrives.

flotorqii

FLO-TORQ III HUB KIT MERCURY 40-125

835257Q 9
!

Special hub kit (complete). Specially designed to reduce the clunck when you shift in gear, specially developed for the quiet four stroke engines.

Past op Mercury/Mariner 40 Bigfoot en groter (alleen door Mercury gemaakte motoren) en op MerCruiser Alpha en Bravo One alsook de voorlopers hiervan (MC-I en TRS)

The drive sleeve is half made of hard plastic rubber and the aft adaptor is longer than the normal hub kit.

FLO-TORQ III HUB KIT YAMAHA 50-100

835272Q09
!

Yamaha buitenboordmotoren (50-100 PK, splines in voorste drukring)

Inhoud:

12-853555Q Forward thrust washer

881940A 1 Drive Sleeve Assembly

878584 Aft adaptor

12-850076 Spacer

859939 Nut

18-47959 Cotter Pin

flotorqiii

FLO-TORQ IV HUB KIT MERCURY 135+

835257Q10
!

Specially designed for quiet four stroke engines (Verado 135 hp and up), however will fit any V6 gearcase.

Will reduce the clung/rattle while shifting. Is a stronger version of the Flo Torq III that is used on 40 to 115 hp engines.

Past op Mercury/Mariner 40 Bigfoot en groter (alleen door Mercury gemaakte motoren) en op MerCruiser Alpha en Bravo One alsook de voorlopers hiervan (MC-I en TRS)